H-beam is a new type of steel for economic construction. H-beam has economical and reasonable cross-sectional shape, good mechanical properties, uniform extension of each point on the cross-section and small internal stress during rolling. Compared with ordinary I-beam, H-beam has the advantages of large cross-sectional modulus, light weight and metal saving, which can reduce the building structure by 30-40%. In addition, because its legs are parallel to the inner and outer sides and the leg ends are right angles, the welding and riveting work can be saved by 25%.

Channel steel is a long strip of steel with a groove-shaped section, which is a carbon structural steel for construction and machinery. It is a section steel with a complex section, and its section shape is groove-shaped. Channel steel is mainly used for building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.

Angle steel, commonly known as angle iron, is a long strip of steel with two sides perpendicular to each other. Angle steel can be composed of different force components according to the different needs of the structure, and can also be used as a connector between components. Widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, bus support installation, and warehouse shelves.

I-beam is mainly divided into ordinary I-beam, light I-beam and low alloy light I-beam. Ordinary I-beam and light I-beam flanges are thick on the web plate and thin on the outside. Ordinary I-beam, light I-beam, because the cross-sectional dimensions are relatively high, narrow, so the section of the two main sleeve moment of inertia difference is large, which makes it in the scope of application has a great limitation. The use of I-beam shall be selected according to the requirements of the design drawings.

​Barbed wire is a, durable, and cost-effective steel fencing material featuring sharp, twisted barbs, designed to contain livestock and provide high-security boundary, agriculture, and property protection. Typically galvanized for rust resistance, it is used for superior, low-maintenance fencing solutions, particularly for Cattle and livestock management.

Protect your property with our heavy-duty CBT-65 Razor Wire Coil from Hansen Metal – designed for maximum security and ease of use.
Each roll features 33 tightly wound loops of galvanized razor-sharp blades, forming a high-tensile barrier that deters intruders. With a stretch of 50 feet and an expanded diameter of 18 inches, each roll covers approximately 25 linear feet.

Razor barbed wire, also known as razor barbed wire, is a barrier made of hot-dip galvanized steel plate or stainless steel sheet punched into a sharp blade shape, and high-tension galvanized steel wire or stainless steel wire as the core wire. Because the barbed wire has a unique shape and is not easy to touch, it can achieve excellent protection and isolation effects. Razor barbed wire guardrail is a new type of protective net, which is formed by cross-welding of blade-shaped straight barbed wire. It is mainly used for confinement protection of garden apartments, government units, prisons, outposts, border defense, etc.; it can also be used for anti-theft windows, high-speed guardrails, and isolation fences.

Razor barbed wire, also known as razor barbed wire, is a barrier made of hot-dip galvanized steel plate or stainless steel sheet punched into a sharp blade shape, and high-tension galvanized steel wire or stainless steel wire as the core wire. Because the barbed wire has a unique shape and is not easy to touch, it can achieve excellent protection and isolation effects. Razor barbed wire guardrail is a new type of protective net, which is formed by cross-welding of blade-shaped straight barbed wire. It is mainly used for confinement protection of garden apartments, government units, prisons, outposts, border defense, etc.; it can also be used for anti-theft windows, high-speed guardrails, and isolation fences.

Hot-dip galvanized iron wire is made with choice low carbon steel wire, through wire drawing, acid washing and rust removing, annealing and coiling. It's mainly used in construction, handicrafts, woven wire mesh, express way fencing mesh, packaging of products and other daily uses.
Size range: BWG 8-BWG 36
Zinc coat: 30-275 g/m2
Tensile strength: 350-550N/mm2
Elongation: 10%
Packing: 1-500kgs/coil, coil with plastic cloth inside and hessian outside or weave outside

Spool-wound galvanized wire is a rust-resistant steel wire coated with zinc (electro or hot-dipped) and wound onto spools for easy handling in industrial, construction, and craft applications. Available in various gauges (commonly 16-20 gauge) and weights (1kg to 100kg), it is used for tie wire, fencing, mesh, and specialized machinery.
Tensile strength: 350-550N/mm2
Elongation: 10%
Packing: 1-500kgs/coil, coil with plastic cloth inside and hessian outside or weave outside

Spool-wound galvanized wire is a rust-resistant steel wire coated with zinc (electro or hot-dipped) and wound onto spools for easy handling in industrial, construction, and craft applications. Available in various gauges (commonly 16-20 gauge) and weights (1kg to 100kg), it is used for tie wire, fencing, mesh, and specialized machinery.
Tensile strength: 350-550N/mm2
Elongation: 10%
Packing: 1-500kgs/coil, coil with plastic cloth inside and hessian outside or weave outside

Hot-dip galvanized iron wire is made with choice low carbon steel wire, through wire drawing, acid washing and rust removing, annealing and coiling. It's mainly used in construction, handicrafts, woven wire mesh, express way fencing mesh, packaging of products and other daily uses.
Size range: BWG 8-BWG 36
Zinc coat: 30-275 g/m2
Tensile strength: 350-550N/mm2
Elongation: 10%
Packing: 1-500kgs/coil, coil with plastic cloth inside and hessian outside or weave outside

The hex bars have good machinability,mechanical features and close dimensional precision as it is rolled steel.Hex bar is typically employed in heat exchangers, chemical equipment,aerospace parts,tanks and marine equipment,among its many uses.They are used in various industrial and commercial requirements and are supplied worldwide

Cold rolled steel coils are often used in the steel industry and are different from hot rolled coils. It refers to a steel strip that is directly rolled into a certain thickness with a roll at room temperature and rolled into a whole roll with a winder. Compared with hot-rolled coils, cold-rolled coils have a brighter surface and higher finish, but generate more internal stress, and are often annealed after cold-rolling.

Metal extrusion is the manufacturing process of choice when producing high volumes of material with a constant cross-section. With the extrusion process, metal material is forced through the shaped opening of a die using high pressure, resulting in an extruded profile. These profiles range from simple shapes like round or rectangular tubes, U- or H-channels, or more complex profiles with multiple internal hollows and external features, such as 80/20 and T-slot framing bar. Extrusion is also standard for wall and window trim as a cosmetic and structural framing component. The raw material typically comes in billet form, which is heated and placed into part of the extrusion press called the container. A die stack sits on the other end of the container, forming the opening, which shapes the material to the desired shape using direct or indirect extrusion methods. The extrusion is then quenched, straightened, sawed to the specified length, and inspected for dimensional consistency and accuracy. Extruded products can easily be post-processed to add features outside the channeled profile.

Metal extrusion is the manufacturing process of choice when producing high volumes of material with a constant cross-section. With the extrusion process, metal material is forced through the shaped opening of a die using high pressure, resulting in an extruded profile. These profiles range from simple shapes like round or rectangular tubes, U- or H-channels, or more complex profiles with multiple internal hollows and external features, such as 80/20 and T-slot framing bar. Extrusion is also standard for wall and window trim as a cosmetic and structural framing component. The raw material typically comes in billet form, which is heated and placed into part of the extrusion press called the container. A die stack sits on the other end of the container, forming the opening, which shapes the material to the desired shape using direct or indirect extrusion methods. The extrusion is then quenched, straightened, sawed to the specified length, and inspected for dimensional consistency and accuracy. Extruded products can easily be post-processed to add features outside the channeled profile.